Panduit Cougar LS9 User Manual download pdf (Page 35)

LABELING EXERCISES

 Enter start, end, and increment values

 Scroll down or up to Place On…

 Select Place On… Labels (this allows more than 9

terminals in a serialization

• Step 6: Press Print

o If you see the Tools too big error, then reduce the font size,

increase terminal space, or check the label rotation.

Exercise 7

Create DIN terminal block labels

NOTE: DIN terminal block labeling is based on European standards and

is primarily used in European countries. The unit of measure for

length in DIN Mode is millimeters (mm).

• Step 1: Insert a continuous tape cassette, such as T050X000VPC-BK

• Step 2: When prompted, select New Blank File. Save previous label if

necessary.

• Step 3: Press F5 to begin the DIN Mode function.

• Step 4: Enter the Module Size

• Step 5: Enter the Module Span

• Step 6: Create label text or tools

• Step 7: Press Print

• Step 8: Repeat steps 4 through 6 until print job is complete

• Step 9: Press DEL at steps 4 or 5 to exit DIN Mode

Hint: You can separate the terminal legends with

lines across the label. To do this, press the

Line key, select @ Pages – Yes. Press Enter.

You can change the terminal spacing by:

• Pressing the Shift + DEL keys, to

Clear All Pages & Format. Then enter

a new terminal space and press the Enter

key.

• …Or by using the LENGTH function.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

No comments

Panduit Cougar LS9 User Manual Page 35